As you know, Partwell’s stock levels are always growing range of MICRO-PERF and PERFORATING STEEL RULES in Blackburn; but with the reduced number of manufacturing sites in the UK, Partwell have decided to invest into a bespoke production unit for quick supply of Micro-Perforating and Perforating Steel Rules in metre lengths.
*We require a minimum order for 10mtrs of each type/size of perf rule and the new tooling will allow us to produce the following range of perfs using this FAST TRACK PERF RULE SERVICE.
We would point out, that our MICRO-PERF and PERFORATING RULES are produced from precision ground tooling rather than normal punch tool methods so we provide absolute dimensional accuracy and avoid tooth/bevel twist without burred/rough tooth profiles.
2pt steel rule - 22.30, 23.30, 23.80mm
Tooth x Gap
| 2pt x 2pt |
|
|
| 3pt x 2pt |
3pt x 3pt |
|
| 4pt x 2pt |
4pt x 3pt |
4pt x 4pt |
| 5pt x 2pt |
5pt x 3pt |
5pt x 4pt |
| 6pt x 2pt |
6ptx 3pt |
6pt x 4pt |
| 7pt x 2pt |
7pt x 3pt |
7pt x 4pt |
| 8pt x 2pt |
8ptx 3pt |
8pt x 4pt |
| 9pt x 2pt |
9pt x 3pt |
9pt x 4pt |
| 10pt x 2pt |
10pt x 3pt |
10pt x 4pt |
| 11pt x 2pt |
11pt x 3pt |
11pt x 4pt |
| 12pt x 2pt |
12pt x 3pt |
12pt x 4pt |
3pt steel rule - 23.80mm
Tooth x Gap
| 1.5mm x 1.5mm |
|
|
|
| 2mm x 1.5mm |
2mm x 2mm |
2mm x 3mm |
|
| 3mm x 1.5mm |
3mm x 2mm |
3mm x 3mm |
|
| 4mm x 1.5mm |
4mm x 2mm |
4mm x 3mm |
4mm x 4mm |
| 5mm x 1.5mm |
5mm x 2mm |
5mm x 3mm |
5mm x 4mm |
| 6mm x 1.5mm |
6mm x 2mm |
6mm x 3mm |
6mm x 4mm |
2pt steel rule Micro Perf - 22.30, 23.30, 23.80mm
Tooth x Gap
0.5mm x 0.5mm
30 TPI MICRO-PERF
50 TPI MICRO-PERF
2pt x 1pt
To order Perforating or Micro Perforating Rule call 01254 671875.
.jpg?v=6c778d91 "Click image for larger view")
