Reverse Bend Original Matrix

A - Locator Size (Between Rules)
B - Nib Height
C - Base Height
D - Nib Width
E - Height of Rule (Assumes 23.80 Cutting)

Channel Reverse Bend self locating creasing matrix can be used where creasing on both sides of the board is required, or where a creasing bead inside the crease is not desirable.  The two creasing rules are inserted into the die to form the channel, and the ridge in the matrix acts as a creasing rule.

• Use of Channel Reverse Bend matrix requires NO specialist skills
• Pre-make ready is possible without expensive capital equipment
• Advanced locator system ensures perfect register
• Alignment between crease rule and channel is accurate first time every time
• Adhesives hold matrix firmly in place during runs
• Peels off machine at end of run with minimum residue left
• Produced to IS0 9002. Patents No’s 807,251 and 909,331

ORDER 5 OR MORE BOXES OF MATRIX NOW AND RECIEVE FREE DELIVERY

1) Apply mitred lengths of Channel Reverse Bend to the gap between the creasing rules and remove the backing tape		2) Operate the press for one complete cycle to fix channel to the cutting plate
3) At the end of the cycle, the creasing rules extract themselves from the channel locator		4) Peel off the locator strip to reveal a matrix in exact register with the creasing rules for a perfect reverse bend
5) Reverse Bend is used for creasing board from both sides in one pass

Packed Dimensions & Weight: 760mm x 80mm x 40mm 1kg