Due to the large accurately ground and hard chrome-plated steel base, the bending always remains even, it also allows the die-maker to have both hands free for the bending operation. The bending tools are rigidly held in position and yet can be easily changed.
Type 1 (50mm)
The solid supporting arm and good power transmission enable bending of rules from 12mm high x 0,4mm thick up to 50mm high x 1.05mm thick.
Type 2 (100mm)
Type 2 has been constructed for bending of high and heavy steels up to 100mm high x 1.5mm thick, 2pt to 8pt rule.
Supplied with hard-chrome plated steel table, noise control.
Both high rule bending machines are equipped with a a foot lever operation and a measuring device, an accuracy can be obtained within 0,5 mm.
Dimensions: 600mm x 1100mm
Dimensions with measuring device: 1100mm x 1300mm
Machines supplied without vernier gage and tools complete.
300mm long vernier gage
500mm long vernier gage
1 pair of tools from 1 to 10 and F1 to F10 for Type 1 machine (50mm)
1 pair of tools from C1 to C15 and M1 to M15 for Type 2 machine (100mm)